Hinged segment ring made of 14k gold with marquise stones

The ring you can see above can be used in a wide variety of piercings, such as the septum or daith piercing. The ring is made of 14-karat gold and is available in two variants: regular yellow gold and a more dimmed white gold - both are 14-karat gold. 

The ring can be opened and closed thanks to a hinge segment. This way, there are no loose parts that can fall out and get lost. The hinged part is fixed to the ring at one end while the other end snaps into place.

The ends of the ring can be pressed against each other to some extent, so that the openings become smaller, increasing the ring's and the closure's tension. If you find it hard to open and close, you can slightly pull the ends.

The ring has five stones at the bottom. There are two round stones on each side and three oval-shaped stones between them. The oval stone in the middle is larger than the rest. All together form a beautiful cascade of clear stones that embellish any piercing.

Both the gold and the white gold model have a bar gauge or thickness of 16g (1.2 mm). However, you can select the diameter of the ring from different options.